2024 Genesis G90 Alignment: Specs & Service

An alignment is generally considered after suspension work, a major pothole impact, or noticeable changes in handling. Regular measurement is more useful than paying for an adjustment without symptoms. Genesis of Peoria can compare the current angles with factory specifications.

• Schedule an inspection after a significant road impact.
• Consider alignment service after suspension component replacement.
• Measure the angles when tire wear or steering behavior changes.

These symptoms can occur when wheel angles move outside the manufacturer’s specifications. Wheels that are out of alignment can scrub the tires as the vehicle rolls. Genesis of Peoria checks the tires, steering, and suspension while measuring all four wheel positions.

• The vehicle pulls on a flat road.
• The steering wheel is not centered while driving straight.
• Tread wears unevenly from one edge of a tire to the other.

The service begins with an inspection of tires, steering, and suspension components for wear that could affect alignment results. Current wheel angles are measured against the factory specification before an adjustment is recommended. This approach helps identify whether the vehicle actually needs correction.

• Camber, caster, and toe measurement on all four wheels.
• Inspection for wear that could hold the alignment out of specification.
• Adjustment toward factory specification where possible.

Worn tie rods, ball joints, or struts can affect alignment results and may need attention before an adjustment. Genesis of Peoria inspects the related tires, steering, and suspension components before recommending alignment work. You receive information about whether an adjustment is appropriate for the vehicle’s condition.

• Inspect steering components for looseness or wear.
• Check suspension components that can change wheel angles.
• Identify conditions that could cause alignment results to change.

A straight tracking vehicle may not need an adjustment at every tire service. The condition of the tire tread, steering, and suspension provides additional context. Genesis of Peoria measures the current angles so you can learn whether correction is needed before paying for an adjustment.

• Check for uneven wear even when steering feels normal.
• Measure alignment after suspension or steering work.
• Schedule an inspection after a major pothole impact.

This gives you a clear basis for deciding whether an adjustment is needed. The inspection also looks for tire, steering, and suspension wear that could affect the readings or prevent the alignment from holding. Service is available through Genesis of Peoria in Peoria, AZ.

• Review the current angles at each wheel.
• Check related components for wear.
• Determine whether adjustment is appropriate.

Next, the technician measures camber, caster, and toe on all four wheels. These angles describe how each wheel meets the road and how the wheels point in relation to the vehicle. The readings are compared with the manufacturer’s specifications. Where the suspension allows adjustment, the angles are corrected toward those specifications.

Booking an appointment gives you current alignment measurements before you pay for an adjustment. That helps distinguish a vehicle that needs correction from one that only needs continued tire and suspension observation. To arrange service, schedule service with Genesis of Peoria or call 480-470-7776.

Before alignment work, Genesis of Peoria inspects the tires, steering, and suspension for wear that could hold a wheel out of specification. A worn steering or suspension component can change the result after the vehicle leaves the service bay, so the inspection is an important part of deciding whether adjustment is appropriate. The technician can also identify conditions associated with pulling, an off-center steering wheel, or uneven tread wear.

Bring your 2024 Genesis G90 to Genesis of Peoria in Peoria for a factory-spec alignment — schedule service.

The service is useful when the vehicle’s handling changes, after suspension work, or when tire wear suggests that the wheels may not be meeting the road evenly. The inspection measures camber, caster, and toe on all four wheels and checks the related tires, steering, and suspension components. You receive a clearer basis for deciding whether adjustment is needed.

Visit Genesis of Peoria at 17336 North 84th Ave, Peoria, AZ 85382. Schedule service online or call 480-470-7776 for assistance.