2024 Genesis GV60 Alignment: Specs & Service

An alignment is generally considered after a major pothole impact, suspension work, or symptoms such as pulling and uneven tire wear. Genesis of Peoria can measure the current angles against factory specifications before recommending an adjustment. This approach helps distinguish an alignment concern from a worn steering or suspension component.

• Consider an inspection after suspension or steering work.
• Watch for tire wear concentrated on one edge.
• Have the angles checked after a significant impact.

These symptoms can indicate that one or more wheel angles are outside specification, although worn tires or suspension parts can create similar concerns. Genesis of Peoria inspects the tires, steering, and suspension components before adjustment. Measuring all four wheels helps identify whether the issue involves alignment angles or another component.

• Vehicle pulls on a flat road.
• Steering wheel is not centered while driving straight.
• One tire edge wears faster than the other.

The service includes an inspection of tires, steering, and suspension components that could hold an alignment out of specification. The technician first measures the current angles, then determines whether adjustment is appropriate. This gives the driver a clearer answer before paying for an adjustment.

• Camber, caster, and toe measurement.
• Adjustment toward manufacturer specifications where possible.
• Inspection for tire, steering, and suspension wear.

An alignment inspection should therefore include the steering and suspension components that influence wheel position. If a worn part is found, Genesis of Peoria can explain the condition before an adjustment is recommended. Repairing the underlying issue may be necessary for the angles to remain within specification.

• Inspect tie rods for wear.
• Check ball joints and struts before adjustment.
• Review tire condition for related wear patterns.

Alignment service is particularly useful after symptoms, a major pothole impact, or steering and suspension component replacement. Measuring before adjusting helps avoid paying for an unnecessary correction. It also provides information about tire wear and the condition of the related components.

• Check alignment after a significant road impact.
• Compare tire wear across the tread.
• Measure current angles before deciding on adjustment.

The results help show whether an adjustment is needed before you pay for one. The inspection also looks for tire, steering, and suspension wear that could cause the alignment to move out of specification again. Schedule service with Genesis of Peoria in Peoria to have the vehicle evaluated.

• Measure wheel angles on all four wheels.
• Compare readings with manufacturer specifications.
• Identify conditions that may affect alignment results.

The technician measures camber, caster, and toe on all four wheels. Where the suspension allows, the angles are adjusted toward the manufacturer’s specification. This process addresses the relationship between the wheel and the road rather than simply centering the steering wheel. Current readings help determine whether adjustment is appropriate.

After the alignment work, the vehicle can be evaluated for steering feel and tracking. Ask the service team about the measured angles and any component wear found during inspection. Schedule service with Genesis of Peoria at 480-470-7776.

The inspection is designed to separate wheel-angle concerns from worn tires, steering components, or suspension parts. Measuring camber, caster, and toe across all four wheels gives the service team a factual starting point. If the suspension does not allow a needed adjustment, the inspection can help identify why rather than treating the symptom alone.

Visit Genesis of Peoria at 17336 North 84th Ave in Peoria, AZ, or call 480-470-7776 to discuss an appointment. You can also schedule service online.

Camber affects how the tire contacts the road, caster influences steering position and directional stability, and toe describes whether the wheels point slightly inward or outward when viewed from above. Incorrect toe can scrub the tread as the vehicle rolls, while other angle concerns may contribute to pulling or an off-center steering wheel.

The inspection also considers tires, steering, suspension, and tie-rod condition because worn components can cause an alignment to move out of specification. Bring your 2024 Genesis GV60 to Genesis of Peoria in Peoria for a factory-spec alignment — schedule service.