2024 Genesis Gv70 Alignment in Peoria, AZ

Arizona road construction, rough pavement, and pothole impacts can affect wheel angles before a scheduled service interval. An alignment check is especially useful if the 2024 Genesis GV70 begins pulling or the steering wheel no longer sits centered.

• Schedule an inspection after suspension or steering repairs.
• Check alignment after a hard pothole or curb impact.
• Watch for uneven tire tread wear.

These symptoms can indicate that one or more wheels are not tracking at the intended angles. A professional inspection helps distinguish alignment concerns from tire, steering, or suspension issues on the all-wheel-drive 2024 Genesis GV70.

• Inspect the inner and outer tire shoulders for uneven wear.
• Note whether the SUV drifts on a straight road.
• Report steering vibration that increases with speed.

The service also includes inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. These checks help address the cause of uneven tire wear or an off-center steering feel.

• Measure camber, caster, and toe on all four wheels.
• Adjust alignment angles where adjustment is available.
• Inspect tires, steering, and suspension for related wear.

An alignment corrects wheel angles, but it cannot repair a loose or worn steering or suspension component. The inspection for your 2024 Genesis GV70 identifies conditions that could cause the vehicle to pull or wear tires unevenly again.

• Check tie rods for looseness or wear.
• Inspect ball joints and struts before alignment adjustment.
• Review repair recommendations before approving additional work.

A 2024 Genesis GV70 that tracks straight may not require immediate adjustment. However, uneven tire wear can develop before pulling becomes obvious, so an inspection is useful when tire condition or recent road impact raises a concern.

• Review tire wear during routine maintenance.
• Request an inspection after a significant pothole impact.
• Consider alignment after steering or suspension replacement.

The 2024 Genesis GV70 uses all-wheel drive, making consistent wheel tracking important for predictable handling. Measuring all four wheels provides a broader view of how the vehicle is traveling on the road rather than checking only one axle.

• Helps reduce uneven tire wear.
• Supports a centered steering feel.
• Measures all four wheels as part of the service.

The technician then measures camber, caster, and toe on all four wheels. Where the suspension allows adjustment, the angles are brought back to the manufacturer’s specifications. Camber describes wheel tilt, caster influences steering stability, and toe describes how the tires point relative to one another. Measuring each angle helps identify the source of pulling or tire scrub.

After adjustment, the vehicle can be road-tested to confirm steering response and tracking. Bring your 2024 Genesis GV70 to Genesis of Peoria for alignment service. Call 480-470-7776 to schedule an appointment.

The inspection also considers tire wear, steering components, and suspension condition. A worn part can allow alignment angles to change while driving, so identifying that condition is an important part of protecting the result. Wheels that are out of alignment scrub the tires as the vehicle rolls, which can wear the tread unevenly and pull the steering off center.

For service in Peoria, Glendale, Sun City, Surprise, El Mirage, Scottsdale, or Phoenix, bring your 2024 Genesis GV70 to Genesis of Peoria in Peoria for a factory-spec alignment — schedule service.

The 2024 Genesis GV70 is a 300-horsepower, all-wheel-drive SUV with a 2.5-liter inline-four engine. Maintaining correct wheel angles supports its steering feel and helps reduce unnecessary tire scrubbing during daily commuting and longer desert-area drives.

Visit Genesis of Peoria at 17336 North 84th Ave, Peoria, AZ 85382, or call 480-470-7776 to discuss alignment service and arrange an appointment.